Crown 2-1/2" - 4

This traditional 2-1/2" - 4 crown mould measures 2.500" wide by .750" thickness, allowing the pattern to be machined sprung (laying horizontally flat) out of four-quarter lumber. The ageless terminating profile is comprised of two tangent radiuses creating the cyma recta in the center, attached to a 7/32" vertical fillet on top. The lower portion of the design consists of a 7/32" vertical line segment, connected to a 23/64" radius cove with a 5/16" wide horizontal fillet on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 1-29/32" tall with a projection of 1-5/8" wide.

We offer a small group of eight profiles with similar design characteristics at various size widths, heights, and projections, for your review and consideration, 1-1/2" wide, 2" wide, 3" wide, 4" wide, 5-1/2" wide, 7" wide, and 8-1/2" wide.